Correct maintenance of solid wood flooring
#1
1. Waxing once every three to six months. The method is to clean the floor and wax it with a semi-dry cloth. Apply the floor surface evenly and "saturate it," then dry it with a soft dry cloth and wipe it back and forth on the floor until it is smooth and bright. If there is no slippery force at home, please pay attention to anti-slip after waxing.
2. If you accidentally pour or leave water on the ground, you must wipe it off with a dry soft cloth in time. Prevent the sun from long-term exposure, direct and strong wind blowing, to avoid rapid drying of the floor, resulting in a reduced scale, cracking and discoloration of the floor. Don't throw cigarettes or matches, etc. on the floor so as not to burn the floor surface. Avoid sharp, sharp objects scratching the board.
3, overweight items should be placed smoothly. Furniture and heavy objects must not be hard-pulled and dragged. They should be lifted and moved gently. If the air conditioner is turned on for a long time, the humidity should be properly adjusted to prevent the air from drying out and causing the floor to shrink and crack. Humidity can be adjusted by using a humidity regulator or planting hydroponic plants indoors, which is both healthy and beautiful.
"cost to put roof over deck,timber grain wallboard,outdoor wood deck covering akershus"
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  CV Cabinet Vision planit solid v11 dvdget3 0 460 01-15-2021, 12:53 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 509 10-28-2020, 11:09 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 523 10-28-2020, 12:36 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 503 10-18-2020, 09:08 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 484 10-16-2020, 06:38 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 475 10-16-2020, 04:52 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 457 10-12-2020, 07:42 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 504 10-12-2020, 02:16 AM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 468 10-11-2020, 11:12 PM
Last Post: dvdget3
  CV Cabinet Vision planit solid v11 dvdget3 0 438 10-09-2020, 10:51 AM
Last Post: dvdget3

Forum Jump:


Users browsing this thread: