the configuration of polymer mortar - Printable Version +- Domain Social Forums (http://www.domainsocial.com) +-- Forum: Marketplace Forums (no discussion) (http://www.domainsocial.com/Forum-Marketplace-Forums-no-discussion) +--- Forum: Domains For Sale - Fixed Price/Offer (http://www.domainsocial.com/Forum-Domains-For-Sale-Fixed-Price-Offer) +--- Thread: the configuration of polymer mortar (/Thread-the-configuration-of-polymer-mortar--16215) |
the configuration of polymer mortar - qizhen0809 - 03-08-2018 the grid cloth smooth, so close. Mesh horizontal overlap width of not less than 100, lap perpendicular to the length of not less than 80, lap joints with mortar to supplement the bottom of the vacancy mortar, mesh cloth shall not be pleated, hollowing, Alice edge. 5, at the concave and convex line angle, a narrow grid should be buried in the bottom of the polymer mortar, the entire grid in a narrow grid cloth, lap width 80. 6, in the wall at both sides of the yin and yang corner of the two-way grid around the angle overlap lap, overlapping lap width of not less than 200. 7, Plastering polymer mortar After the bottom of the polymer mortar and pressed into the grid cloth, until the mortar to the surface of non-sticky solidified hands, began to plastering polymer mortar, plaster thickness to cover the grid Cloth shall prevail.Cement fiber board, also known as fiber cement board. Is based on silicon, calcium-based materials, adding plant fibers, after pulping, copying, pressure and conservation made of a new type of building materials. Cement fiber board with fire insulation, waterproof moisture, thermal noise, light and high quality, construction and quarantine, economical and beautiful, completely harmless, long life and no formaldehyde pvc perforated sheet plastic composite wall paneling plastic wood outdoor green fencing RE: the configuration of polymer mortar - michaeltim - 03-08-2018 thank you. nice info. |