05-15-2018, 09:09 AM
Perforated & engraved panels can be used for many purposes, for acoustic or aesthetical reasons, to depict works of art, letters, logos, etc. However, the fabrication process is rather labor how to install composit floor decking Vietnam intensive both for preparation work and also for the actual routing out of shapes and drilling of holes.ornamented panels offer a diversity of patterns and images that make the building claddings come to life. A production worker prepares the milling machine. For interior use Coated panels can be drilled or routed and then left as they are.
When individual routing must be programed on the basis of drawings, the process Alternative Wood Fence takes two or three times longer than for standard perforations. This is the case especially for irregular and randomly located patterns.Increased exposure to weathering, panels are first primed, then fabricated and subsequently coated.After the cutting The edges are broken with the help of a special planer.
extra cutting remains are removed with a sponge, and in the end, the fine fibers are burned off and cleaned, and finally, the edges are water-proofed. Technical considerations Crucial to have panel fastened and stable at all times of production. Distances between perforations or engraved areas should not be too small, and for larger panels. A solid perimeter zone is required, so that the panels are not too fragile for handling on site stucco panel cladding box and installation.
When individual routing must be programed on the basis of drawings, the process Alternative Wood Fence takes two or three times longer than for standard perforations. This is the case especially for irregular and randomly located patterns.Increased exposure to weathering, panels are first primed, then fabricated and subsequently coated.After the cutting The edges are broken with the help of a special planer.
extra cutting remains are removed with a sponge, and in the end, the fine fibers are burned off and cleaned, and finally, the edges are water-proofed. Technical considerations Crucial to have panel fastened and stable at all times of production. Distances between perforations or engraved areas should not be too small, and for larger panels. A solid perimeter zone is required, so that the panels are not too fragile for handling on site stucco panel cladding box and installation.