03-20-2018, 10:08 AM
Plant foaming agent selection is correct The plant-based cement foaming agent uses imported high-quality natural plant polymer materials as raw materials, and is produced through a series of complex chemical Sitting Bench Made with Composite reactions. The product is a light yellow pure transparent oily liquid. Hard water insensitive, non-toxic, odorless, no precipitate. The pH value is close to neutrality, it is non-corrosive to cement and metal, and it does not pollute the environment. The foaming agent is resistant to storage, not easily degraded, has excellent foaming power, rich foam, and moderate foam stability.
The foaming cement produced by using the foaming agent has the characteristics of low consumption, low cost, stable quality, and the like, so it is widely used in floor heating engineering and Pvc Products South Fl. roof insulation engineering, and the construction cost can be significantly reduced. Disadvantages: Because the foamed cement produced by the foaming agent has internal pores in a connected state, the foamed cement has good air permeability and poor permeability resistance and cannot be used in a water seepage-resistant project.
Due to the foam stability of the plant foaming agent, the thickness of the one-time poured foamed cement is generally not more than 200 mm, otherwise surface collapse phenomenon may easily occur. Compared with the foamed cement made of animal foaming agent under the same density, its heat insulation performance and compressive strength are slightly damaged, so the application in some projects with special plastic retaining walls for playgrounds requirements is limited.
The foaming cement produced by using the foaming agent has the characteristics of low consumption, low cost, stable quality, and the like, so it is widely used in floor heating engineering and Pvc Products South Fl. roof insulation engineering, and the construction cost can be significantly reduced. Disadvantages: Because the foamed cement produced by the foaming agent has internal pores in a connected state, the foamed cement has good air permeability and poor permeability resistance and cannot be used in a water seepage-resistant project.
Due to the foam stability of the plant foaming agent, the thickness of the one-time poured foamed cement is generally not more than 200 mm, otherwise surface collapse phenomenon may easily occur. Compared with the foamed cement made of animal foaming agent under the same density, its heat insulation performance and compressive strength are slightly damaged, so the application in some projects with special plastic retaining walls for playgrounds requirements is limited.