06-27-2018, 07:57 AM
Pearl surface treatment This kind of production process is relatively simple, the technical content is small, the cost is low, so the stainless steel sink produced is also low in price. But its biggest drawback is that it is not resistant to scratch, the surface is prone to scratches, there will be serious coating off, 2 matte surface treatment This matte surface cost of wood stockade fencing per square foot treatment tank surface hardness, improve its scratch resistance. Smoothing treatment This treatment method uses a drawing device to repeatedly draw on the surface of the sink to form a fine silk mark on the surface.
The surface is extremely smooth, and the touch and vision also have a strong affinity. The surface of domestic drawing sheet There will be small particles appear to affect the appearance, so the general melting ice off composite decking drawing plate is the choice of imported plates.
Polished mirror treatment The surface of the sink is polished repeatedly to form a mirror-like effect on the surface. However, this kind of treatment is not suitable for general household use, because it is easy to cause scratches and affect the original results. Maintenance Tips for Stainless Steel Sinks Frequent Cleaning Sinks are used frequently, so the sink will have a lot of dirt, so the sink should be cleaned lowes composite panel regularly, washed with warm water and detergent, and then rinsed with clean fresh water.
Be careful not to scrub the sink with steel wire, scouring wire, or abrasive material. This will damage the sink. Do not use the sink as a cutting board to cut things on the sink. This can seriously damage the sink and reduce the service life of the sink. In addition, you cannot use sharps and iron wire to rub on it. Salt and chlorine will erode the sink. For foods with a relatively high salt or chlorine content, it should not be placed in the sink for too long, because multi colour decking alternative salt erodes the sink material very strongly.
The surface is extremely smooth, and the touch and vision also have a strong affinity. The surface of domestic drawing sheet There will be small particles appear to affect the appearance, so the general melting ice off composite decking drawing plate is the choice of imported plates.
Polished mirror treatment The surface of the sink is polished repeatedly to form a mirror-like effect on the surface. However, this kind of treatment is not suitable for general household use, because it is easy to cause scratches and affect the original results. Maintenance Tips for Stainless Steel Sinks Frequent Cleaning Sinks are used frequently, so the sink will have a lot of dirt, so the sink should be cleaned lowes composite panel regularly, washed with warm water and detergent, and then rinsed with clean fresh water.
Be careful not to scrub the sink with steel wire, scouring wire, or abrasive material. This will damage the sink. Do not use the sink as a cutting board to cut things on the sink. This can seriously damage the sink and reduce the service life of the sink. In addition, you cannot use sharps and iron wire to rub on it. Salt and chlorine will erode the sink. For foods with a relatively high salt or chlorine content, it should not be placed in the sink for too long, because multi colour decking alternative salt erodes the sink material very strongly.