10-30-2017, 02:59 AM
hardware to prevent the hardware stained with wood paint. In addition to the operation should be fine and timely will not clean the hardware and other places clean, should try to paint, after the door locks, handles and latches, etc., to ensure that the hardware clean and beautiful. 3, when the allocation of matching products Wood paint construction, if the choice of water-based wood paint, only need to dilute the proportion of water. And if you are using nitro paint
and polyurethane paint you need to add the relevant curing agent and thinner, must be strictly in accordance with the fixed ratio of deployment. Therefore, nitrocellulose and polyurethane paint in the construction process, it is best to have professional guidance. Strictly in proportion and use supporting thinner, curing agent, so as to avoid bite the end, wrinkles and other issues. 4, after the deployment of wood paint to filter the wood after the deployment of a good
filter to this step. Because the dust in the air mixed with wood paint will form a small particle, if not filtered, brush directly, it will cause the surface of the film particles, the surface is not smooth and smooth. Therefore, the deployment of wood paint, the need to filter the filter bucket filter impurities, and then the best in more than 10 minutes after the construction. 5, the remaining paint treatment of water-based wood paint after the use of finished, for the remaining paint,
composite wooden plastics
outdoor plywood board India
composite decking vs wood cost in ontario canada
and polyurethane paint you need to add the relevant curing agent and thinner, must be strictly in accordance with the fixed ratio of deployment. Therefore, nitrocellulose and polyurethane paint in the construction process, it is best to have professional guidance. Strictly in proportion and use supporting thinner, curing agent, so as to avoid bite the end, wrinkles and other issues. 4, after the deployment of wood paint to filter the wood after the deployment of a good
filter to this step. Because the dust in the air mixed with wood paint will form a small particle, if not filtered, brush directly, it will cause the surface of the film particles, the surface is not smooth and smooth. Therefore, the deployment of wood paint, the need to filter the filter bucket filter impurities, and then the best in more than 10 minutes after the construction. 5, the remaining paint treatment of water-based wood paint after the use of finished, for the remaining paint,
composite wooden plastics
outdoor plywood board India
composite decking vs wood cost in ontario canada