in the keel, and uniform arrangement

[qizhen0809]

wooden keel with nail installation. Along the gutter and plate slot at the sound-absorbing panels with a nail fixed to the keel, the nail must be more than 2/3 embedded , and require a certain density, each sound-absorbing panels and each keel The number of couplings on the nail is not less than 10. Acoustic board transverse installation is notched up, and install the installation
of accessories, each sound absorbing board followed by phase. The sound-absorbing panels are mounted vertically with the notches on the right and the same method from the left. Two sound-absorbing board side must be set aside not less than 3mm gap. Fourth, the installation of sound-absorbing panels Attention installation of sound-absorbing panels should pay attention to paint color, wood veneer
sound-absorbing panels have color is normal. Acoustic panel paint finishes and other parts of the installation site may have hand-painted paint color. In order to keep the color of the paint consistent, it is recommended to adjust the color of the handmade paint of other parts according to the prefabricated paint color of the sound absorbing panel after the sound absorbing panel is installed; or, the wood
20 x 10 deck kits
pre made steps for outside
clearance vinyl decor panels