12-19-2017, 11:20 AM
also announced yesterday another decorative decorating materials - veneer veneer plywood quality sampling results. Quality inspection staff announced six kinds of easy to open the poor off the poor quality products,wood plastic composite sleepers hope to decorate the house of consumers pay special attention.cheap ways to cover concrete patio These unqualified products include 'Swan' brand plywood (2440mm × 1220mm × 2.5mm) produced by Hebei Langfang Timber Co., Ltd .; 'Gailong' brand plywood (2440mm × 1220mm) produced by Hebei Langfang Yongshun Wood Co., × 2.5mm); 'Ma Tou' brand plywood (2440mm × 1220mm × 2.5mm) produced by Langfang Sansheng Wood Co., Ltd .; 'Junling'
brand plywood (2440mm × 1220mm) produced by Langfang Tongli Wood Co., × 2.4mm); Zhejiang Jiashan Kaohsiung Wood Co., Ltd. produced 'Huijiale' brand plywood (2440mm × 1220mm × 2.8mm); Zhejiang Yiqun Wood (Jiashan) Co., Ltd.composite decking for pool surround produced the 'bat' brand plywood 2440 mm × 1220 mm × 2.4 mm).deck coating that looks plastic (Source: Beijing Evening News) Recently, the AQSIQ reinforced laminate flooring product quality for the third time a national random spot checks. A total of 52 products produced by 52 enterprises in 13 provinces and municipalities including Beijing, Liaoning, Heilongjiang and Shanghai were selected and 41 qualified products were
obtained. The passing rate of product sampling was 78.8%. The sampling of formaldehyde emission indicators for all products all the standard compliance, the main quality problems are not met the surface wear.how to remove scratches from vinyl fence Surface wear performance is an important indicator of laminate flooring,prefab wood walkway which directly affects the service life of the product and decorative effect, because the surface of the product once damaged can not be repaired, its use value will be lost. The spot checks found that the main reasons for product quality failure are: First, the use of substandard raw materials. Due to the high cost of the wear-resistant laminate flooring surface, some companies in
brand plywood (2440mm × 1220mm) produced by Langfang Tongli Wood Co., × 2.4mm); Zhejiang Jiashan Kaohsiung Wood Co., Ltd. produced 'Huijiale' brand plywood (2440mm × 1220mm × 2.8mm); Zhejiang Yiqun Wood (Jiashan) Co., Ltd.composite decking for pool surround produced the 'bat' brand plywood 2440 mm × 1220 mm × 2.4 mm).deck coating that looks plastic (Source: Beijing Evening News) Recently, the AQSIQ reinforced laminate flooring product quality for the third time a national random spot checks. A total of 52 products produced by 52 enterprises in 13 provinces and municipalities including Beijing, Liaoning, Heilongjiang and Shanghai were selected and 41 qualified products were
obtained. The passing rate of product sampling was 78.8%. The sampling of formaldehyde emission indicators for all products all the standard compliance, the main quality problems are not met the surface wear.how to remove scratches from vinyl fence Surface wear performance is an important indicator of laminate flooring,prefab wood walkway which directly affects the service life of the product and decorative effect, because the surface of the product once damaged can not be repaired, its use value will be lost. The spot checks found that the main reasons for product quality failure are: First, the use of substandard raw materials. Due to the high cost of the wear-resistant laminate flooring surface, some companies in