foot line, paving the edge of the floor
#1
been cut off the tongue and groove or flat flat side of the floor, placed directly close to the foot line can be placed. Xiaobian Weapon: If the space did not retain the foot line, paving the edge of the floor must be reserved when the location of the foot line. Generally in the pavement, with the same thickness of small wooden blocks or small pieces of baseboards to be placed between the wall and the floor (wood
thickness to be consistent with the foot line), so reserve the location of the foot line. 4, dealing with one-half corner of the way pavement, near the wall or in the irregular position of the floor need to cut. First, measure the length of the ground; take out the floor to tape length to measure the required length; fixed with a square, with a pencil along the edge of the ruler to draw a line; Part4: the floor plan has the coup
post-processing is essential Do not think that the floor is finished, in fact, after the construction of the floor inspection and cleaning and maintenance is very important for you to explain in detail how to do a good job in the late floor of the pavement deal with. 1, check the details: hollowing up to check the floor pavement, more or less there will be some flaws, this time you need to pay attention to the details of
plastic decking contraction and expansion
composite white wood plastic decking
privacy fence installation cost per foot gutters
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 427 01-15-2021, 02:37 PM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 424 10-29-2020, 12:32 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 413 10-28-2020, 06:01 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 387 10-28-2020, 02:06 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 435 10-16-2020, 08:11 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 474 10-16-2020, 04:52 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 358 10-12-2020, 10:24 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 359 10-12-2020, 07:38 AM
Last Post: dvdget3
  Siemens Solid Edge ST9 MP07 dvdget3 0 502 10-12-2020, 02:16 AM
Last Post: dvdget3
  Creative.Edge.Software.iC3D.Suite.v4.1.0.Win64 dvdget3 0 381 10-09-2020, 01:31 PM
Last Post: dvdget3

Forum Jump:


Users browsing this thread: 1 Guest(s)