12-18-2017, 01:22 PM
research and development investment less than 3% of total investment. Fourth, the economic situation led to lower product prices, product quality and safety there is a big risk.plastic wooden wall panel Recently, the 'double standard' of floor surfing was formally implemented. The national standard GB / T20238-2006,maxituf plastic lumber 'Acceptance and Usage Specification of Wood Floor Pavement' and 'Technical Specification for Wood Floor Paving' of the Ministry of Construction (CECS191: 2005) Paving the quality of the rules to follow. For the new parquet flooring standards, to provide consumers with 9 simple ways to check the wood flooring pavement is qualified. 1, the accessories used in the
system must be qualified products. 2, the thickness of the mat must be greater than 2mm, the overall slight wave shape. 3, the maximum gap between baseboard product and flooring product should be less than 3mm.wood tiles for wall in kerala 4, according to the standard requirements of the pavement,cable railing fencing labor cost per foot the height of the product can not be greater than 0.2mm. 5, with the blade of the knife back and forth inserted into the floor of the joints, if it can be inserted into the gap may be too large. 6, sawing the door above the floor surface can not be greater than 1.0mm. 7, standing buckle at the Department, with one foot soles quickly beat buckle surface, check the buckle is solid. 8, the
amount of floor standards loss rate usually should not exceed 5%.advantages shear wall 9, floor and pipe and walls and other joints should be reserved for 8-12mm telescopic gap. June 28 - July 4 National Wood-based panel Quality Supervision and Inspection Center to Shen pumping checks to strengthen the floor,apply plastic coating to wood doors the Provincial Furniture Association floor with the professional committees, the successful completion of sampling plans. The spot checks 10 brands of flooring products. President Zushu Wu, Vice President Yu Ya Chen, secretary general Bai Hong and Minister Zhang Ying held several talks with Jiang Songlin, deputy secretary general of the National Wood-
system must be qualified products. 2, the thickness of the mat must be greater than 2mm, the overall slight wave shape. 3, the maximum gap between baseboard product and flooring product should be less than 3mm.wood tiles for wall in kerala 4, according to the standard requirements of the pavement,cable railing fencing labor cost per foot the height of the product can not be greater than 0.2mm. 5, with the blade of the knife back and forth inserted into the floor of the joints, if it can be inserted into the gap may be too large. 6, sawing the door above the floor surface can not be greater than 1.0mm. 7, standing buckle at the Department, with one foot soles quickly beat buckle surface, check the buckle is solid. 8, the
amount of floor standards loss rate usually should not exceed 5%.advantages shear wall 9, floor and pipe and walls and other joints should be reserved for 8-12mm telescopic gap. June 28 - July 4 National Wood-based panel Quality Supervision and Inspection Center to Shen pumping checks to strengthen the floor,apply plastic coating to wood doors the Provincial Furniture Association floor with the professional committees, the successful completion of sampling plans. The spot checks 10 brands of flooring products. President Zushu Wu, Vice President Yu Ya Chen, secretary general Bai Hong and Minister Zhang Ying held several talks with Jiang Songlin, deputy secretary general of the National Wood-