05-31-2018, 12:04 PM
Strand Bamboo that uses strand technology to turn 100% rapidly renewable bamboo into a beautiful yet exceptionally durable green building material. architectural grade strand bamboo plywood and armadillo decking warranty can be cut and sanded using conventional woodworking equipment. You can glue and fasten it with the same materials used on wood. Fasteners and Adhesives panels work well with most methods of fastening. This includes, joinery, screws, brad nailing and clamp and glue methods. Please note however that due to bamboos’ greater hardness and less give that screws should be pre-drilled and that hammer and nail should be avoided.
Sanding panels can be sanded like a wood product using the same materials What Wood to Replace Pontoon Flour and equipment including standard sandpaper, hand sanders and shop or industrial sanding equipment. Note however that more dense and hard and may have greater porosity than most wood products and for this reason may require additional sanding and filling to achieve desired results.
Finishing finished using conventional methods and materials that include hand- rubbed, spray, brush, dip applied or What Is the Pvc Flooring industrial roll or flow coating equipment with a UV cure system. All standard finishes ordinarily work well, but you should always check for compatibility, including by testing the finish on a sample piece. Because cannot test the compatibility of every finish system available on the market, the ultimate responsibility for finish compatibility rests with the user. When applying a wax finish it is recommended to first apply a How to Install Pvc Wall Panels hard-drying seal coat.
Sanding panels can be sanded like a wood product using the same materials What Wood to Replace Pontoon Flour and equipment including standard sandpaper, hand sanders and shop or industrial sanding equipment. Note however that more dense and hard and may have greater porosity than most wood products and for this reason may require additional sanding and filling to achieve desired results.
Finishing finished using conventional methods and materials that include hand- rubbed, spray, brush, dip applied or What Is the Pvc Flooring industrial roll or flow coating equipment with a UV cure system. All standard finishes ordinarily work well, but you should always check for compatibility, including by testing the finish on a sample piece. Because cannot test the compatibility of every finish system available on the market, the ultimate responsibility for finish compatibility rests with the user. When applying a wax finish it is recommended to first apply a How to Install Pvc Wall Panels hard-drying seal coat.